Most commercial LED flashlightsuse three AAA or AA batteriesin series that produce 4.5V. The batteriesthen drive four white LEDs that connectin parallel. These LEDs can workat voltages as low as 2.7V ...

This is a very simple LED dimmer circuit which has 2 transistors, 1 resistor and 2 potentiometers. Typical segment displays LEDs consume around 25 mA for each segment and should be limited to this ...

The mystery of adding LED lights to a modern BMW with CAN Bus (Controller Area Network) electrical system is easy to resolve. The “smart” CAN Bus smells a rat when you pop in an LED brake light or ...

A blast from the Elektor archives: this 1998 battery tester uses a simple LED display to reveal a battery’s true condition under load — even below 1 V.

Guest columnist Faraz Hasan, marketing and business development manager at Tyco Electronics Circuit Protection Products says that LEDs can require overcurrent protection despite built-in safety ...

CCFL backlights are the most common backlight technology and are used in displays ranging from 5.7 to 23 in. or more diagonal. They can have from one to 24 or more lamps mounted along the edge of the ...