This application note presents the process of converting a serial output into parallel output using common serial-to-parallel register integrated circuits. The document also discussed the CS556x/7x/8x ...

The HV509 is a 200V, 16-channel serial to parallel converter. The high voltage outputs and the backplane driver are designed to source and sink ±1.0mA. The high voltage outputs are controlled by a ...

Designed to drive printers and LCDs, the HV610, a 32-channel, serial-to-parallel converter, provides high-voltage, push-pull outputs in the realm of +50V/-40V. The chip’s outputs can be individually ...

According to this KB article, if you want to use any of your old hard drives in a new G5 using a Serial to Parallel adapter, you're out of luck.<BR><BR>Now I am not getting a G5 anytime soon so this ...

I'd probably get a USB to serial (RS-232) adapter and then stick a serial to parallel adapter on the end of it. Long time ago I bought a USB to parallel port adapter cable to use with an old HP laser ...

Reader EPooch needed a USB attached display for a future project. From initial research it seemed that most available solutions involved using a “usb to serial” adapter followed by a “serial to ...

The tactile device is thin, flexible, and has 25 stimulation generating points within a 2 cm × 2 cm area. To achieve wearable, to install the driving circuit close to the device, we use high voltage ...