Just doing a practice question on PTP and came across a diagram with the pinout diagram for what the exam says is a crossover cable. On the diagram, pins 1&2 are swapped with 3&6 (which I expected). …

Auto-MDIX (automatic medium-dependent interface crossover) is a computer networking technology that automatically detects the required cable connection type (straight-through or crossover) and …

So when we need to connect similar devices we use a crossover cable. With 1000Base-T it uses all four pairs to simultaneously transmit and receive data then why do we need acrossover cable?

This situation only existed when we used an older router like the Cisco 1841. Uses of straight-through and crossover cable in the connection between network devices Here are the most used physical …

So we can use a straight cable where we need cross cable. When automatic medium-dependent interface crossover (auto-MDIX) is enabled on an interface, the interface automatically detects the …

In the official cert guide it says that crossover cables transmit on the same pin pair and straight through cables transmit on different pin pairs

So you need a crossover cable to connect cables between switches AND crossover cables between routers.And you need crossover cable to connect between PC and Router. so ill copy and paste this …

Apr 22, 2023 · An ethernet crossover cables switches pairs 1&2 with 3&6, T1 crossover switches 1&2 and 4&5, 56/64K crossover switches 1&2 and 7&8. A rollover is 1 to 8, 2 to 7, 3 to 6, and 4 to 5.

And by knowing the two ends of a cable you should be able to recognize it as a straight-through (same standard on both ends, either T568A or T568B) or a crossover cable (T568A standard on one end …

I connected unlike devices, router to switch, router to coax box , pc to switch with a straight through cable and they connected but when i use the auto connect, it uses a crossover cable for these 3 …